Linksys CM3016 16×4 686 Mbps DOCSIS 3.0 Cable Modem

Network Standards:
IEEE802.3
IEEE802.3u
IEEE802.3u
IPv6 support (Internet Protocol Version 6)

Connectivity
RF F-type female 75O connector
RJ-45 Ethernet port 10/100/1000 Mbps (Auto-MDI / MDIX)
Management
Web-based GUI control configuration and management
Dual-color LEDs clearly display network status and activity
Power on self-diagnostic
MIB II / MCNS MIB
Proprietary MIBs for extended support

Reception-Demodulation
Demodulation: 64QAM, 256QAM
Data Rate: Up to 686 Mbps with 16 bonded downstream channels
Frequency (edge-to-edge): 108 ~ 1002 MHz
Channel Bandwidth: 6 MHz
Signal Level: -15 dBmV to 15 dBmV
Input return loss: >6dB

Transmitter-Modulation
Modulation: QPSK, 8QAM, 16QAM, 32QAM, 64QAM, and 128QAM (SCDMA only)
Data rate up to 122 Mbps with 4 upstream channel bonding
Frequency: 5 ~ 42 MHz
Output return loss: >6dB

Mechanical
5 status LEDs (Power, DS, US, Status, LAN)
Factory default reset button

Environmental
Power Input: DC 12V / 2A
Operating Temperature: 32 degree F (0 degree C) to 104 degree F (40 degree C)
Operating Humidity: 10% ~ 90% (Non- condensing)
Storage Temperature: -40 degree F (-40 degree C) to 176 degree F (80 degree C)

SYSTEM REQUIREMENTS
Requires an existing cable account. If you don’t have an existing cable account,
contact your local cable provider to sign up for broadband Internet service.
Modem will not work with DSL service.
User Documentation is also available at:
www.linksys.com/support