HP Z820 SOLIDWORKS E5-2643 V2 6 Cores 3.5Ghz 16GB 250GB M.2 SSD W7000 Win 10

SOLIDWORKS 3D CAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work.
Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with SOLIDWORKS.

Processor: Single Intel Xeon E5-2643v2 Six Core 3.5G hz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR3-1866 Memory. Supports up to 512GB of total memory, 16 DIMM slots, 8 slots per CPU

PCIe
Solid State Drive: 250GB M. 2 SATA PCIe SSD with PCIe Adapter Card

Storage: Drive

Drive Bays: Up to two 3.5 ” or 2.5 ” (adapter needed for 2.5 ”) internal SATA, SAS or SSD hard drives 2 external 52.5 ” bays

Raid Controller: On-board RAID Support RAID 0, 1, 10 (Factory integrated)

Graphics: AMD FirePro W7000 4GB GDDR5 Graphic Card, DirectX 11.1 (Certified Hardware for SOLIDWORKS)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: SOLIDWORKS Software is not included

Power Supply: 1125W Power Supply

Optical: DVDRW Drive

Networking Dual Integrated Intel GbE LAN

Slots: 2 PCIe Gen3 x16, 1 PCIe Gen3 x16 (with 2nd CPU), 1 PCIe Gen3 x16 mechanical/x8 electrical, 1 PCIe Gen3 x8 mechanical/x4 electrical, 1 PCIe Gen2 x8 mechanical/x4

Front Ports: 2 USB 3.0, 1 USB 2.0, 1 Headphone, 1 Microphone, and 1 IEEE 1394a

Rear Ports: 1 IEEE 1394a, 2 USB 3.0, 4 USB 2.0, 1 Serial, PS/2 keyboard and mouse, 2 RJ-45 to integrated Gigabit LAN, 1 Audio Line-In, 1 Audio Line-Out, 1 Microphone

Internal Ports: 6 USB 2.0 ports available by three separate 2×5 headers Each 2×5 header supports either one HP Internal USB Port Kit (EM165AA) or one Media Card Reader

Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.