HP Z640 SOLIDWORKS 2x E5-2643 V3 12 Cores 3.4Ghz 32GB 250GB NVMe K4200 Win 10

SOLIDWORKS 3D CAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with SOLIDWORKS.

Processor: Dual Intel Xeon E5-2643V3 Six Core 3.4Ghz Processors 12 Cores, 24 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 32GB DDR4-2133 Memory. Supports up to 256GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory – 4 DIMM slots on the motherboard and 4 on the Optional 2nd CPU and Memory Riser Module (included with dual processor configurations)

PCIe Solid State Drive: 250GB NVMe M.2 SSD with PCIe Adapter Card

Drive Bays: Up to two 3.5” or 2.5” (adapter needed for 2.5”) internal SATA, SAS or SSD hard drives 2 external 52.5” bays

Raid Controller: Factory integrated RAID available for SATA/SAS drives (RAID 0, 0 Data, 1, 5, and 10)

Graphics: Nvidia Quadro K4200 4GB GDDR5 Graphic Card, DirectX 11.2 (Certified Hardware for SOLIDWORKS)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: SOLIDWORKS Software is not included

Power Supply: 925W Power Supply

Optical: DVDRW Drive

Networking Integrated Intel I218LM PCIe GbE
Controller

Slots:

• Slot 1: PCI Express Gen2 x1 with open-ended connector Full-height, Half-length (Not available when 2nd processor/memory module is installed)
• Slot 2: PCI Express Gen3 x16 Full-height, Full-length (with extender)
• Slot 3: PCI Express Gen2 x4 with open-ended connector Full-height, Full-length (with extender)
• Slot 4: PCI Express Gen3 x8 with open-ended connector Full-height, Full-length (with extender)
• Slot 5: PCI Express Gen3 x16 Full-height, Full-length (with extender)
• Slot 6: PCI 32bit/33MHz Full-height, Full-length (with extender) Open-ended connector allows a greater bandwidth (eg, x16) card to be installed physically into a lower bandwidth connector/slot

Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone

Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out Serial supported with optional connector on PCI bracket cabled to system board connector

Internal Ports: 2 USB 2.0 ports available with a single 2×5 header The 2×5 header can be converted to a standard (Type-A) USB connector through the use one HP Internal USB Port Kit (EM165AA) This port kit uses one half of the 2×5 header The 2×5 header also supports up to one 15-in-1 Media Card Reader 1 USB 3.0 port available by a 2×10 header

Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.