HP Z440 SOLIDWORKS E5-1620 V3 4 Cores 3.5Ghz 16GB 500GB NVMe K4200 Win 10

SOLIDWORKS 3D CAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with SOLIDWORKS.

Processor: Single Intel Xeon E5-1620v3 Quad Core 3.5Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR4-2133 Memory. Supports up to 128GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory

PCIe Solid State Drive: 500GB NVMe M.2 SSD with PCIe Adapter Card

Drive Bays: Up to two 3.5” or 2.5” (adapter needed for 2.5”) internal SATA, SAS or SSD hard drives 2 external 52.5” bays

Raid Controller: On-board RAID Support RAID 0, 1, 10 (Factory integrated)

Graphics: Nvidia Quadro K4200 4GB GDDR5 Graphic Card, DirectX 11.2 (Certified Hardware for SOLIDWORKS)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: SOLIDWORKS Software is not included

Power Supply: 525W power supply, 85% efficient

Optical: DVDRW Drive

Networking Integrated Intel I218LM PCIe GbE
Controller

Slots: Slot 1: PCI Express Gen2 x1 Full-height, Slot 2: PCI Express Gen3 x16 Full-height, Slot 3: PCI Express Gen2 x4 Full-height, Slot 4: PCI Express Gen3 x8
Full Height, Slot 5: PCI Express Gen3 x16 Full-height, Slot 6: PCI 32bit/33MHz Full-height

Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone

Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out
Serial supported with optional connector on PCI bracket cabled to system board connector

Internal Ports: 2 USB 2.0 ports available with a single 2×5 header The 2×5 header can be converted to a standard
(Type-A) USB connector through the use one HP Internal USB Port Kit (EM165AA) This port kit uses one
half of the 2×5 header The 2×5 header also supports up to one 15-in-1 Media Card Reader
1 USB 3.0 port available by a 2×10 header

Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.