HP Z420 SOLIDWORKS E5-1650 V2 6 Cores 3.5Ghz 16GB 250GB SSD W7000 Win 10

SOLIDWORKS 3D CAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with SOLIDWORKS.

Processor: Single Intel Xeon E5-1650v2 Six Core 3.5Ghz Processor 6 Cores, 12 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR3-1866 Memory. Supports up to 64GB of total memory, 8 DIMM slots, 2 Channels per CPU

Storage: New 250GB 6Gb/s SATA Solid State Drive

Drive Bays: Up to three 3.5” or 2.5” (adapter needed for 2.5”) internal SATA, SAS or SSD hard drives 3 external 52.5” bays

Raid Controller: SATA RAID level 0, 1, 5 and 10 and SAS RAID level 0, 1, 10 available on motherboard

Graphics: AMD FirePro W7000 4GB GDDR5 Graphic Card, DirectX 11.1 (Certified Hardware for SOLIDWORKS)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: SOLIDWORKS Software is not included

Power Supply: 600W Power Supply

Optical: DVDRW Drive

Networking Single Integrated Intel GbE LAN

Slots: 2 PCIe Gen3 x16, 1 PCIe Gen3 x16 (with 2nd CPU), 1 PCIe Gen3 x16 mechanical/x8 electrical, 1 PCIe Gen3 x8 mechanical/x4 electrical, 1 PCIe Gen2 x8 mechanical/x4

Front Ports: 2 USB 3.0, 1 USB 2.0, 1 IEEE 1394a standard, 1 Headphone,1 Microphone

Rear Ports: 2 USB 3.0, 4 USB 2.0,1 IEEE 1394a port, 2 PS/2, RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-Out, 1
Microphone

Internal Ports: 6 USB 2.0 ports available by three separate 2×5 headers: each header supports either a HP Internal USB
Port Kit or USB Media Card Reader, one on each header Each Internal Port Kit has two USB 2.0
connectors

Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.