Eggxpert Review
G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
SKU: 9SIA4YUJ955421Thương hiệu: KHAC
Còn hàng· Giao hàng sau 3 ngày
1.825.005 ₫
Giá chưa gồm VAT 8% · Đã gồm VAT: 1.971.005 ₫ / sản phẩm
Điện ước tính: 86 kWh/tháng · ~280.800 ₫/thángTính TCO chi tiết
Tạm tính: 1.825.005 ₫
Bảo hành 36 tháng
Chính hãng
Giao sau 3 ngày
Toàn quốc
Hỗ trợ kỹ thuật
24/7 qua hotline
Hoá đơn VAT
Đầy đủ, đúng hạn
Mua càng nhiều, giá càng tốt
| Số lượng | Đơn giá | Tiết kiệm |
|---|---|---|
| 1–2 máy | 1.825.005 ₫ | — |
| 3–9 máy | 1.770.255 ₫ | −3% |
| từ 10 máy | 1.715.505 ₫ | −6% |
Giá trên chưa gồm VAT. Đơn từ 20 máy trở lên hoặc kèm dịch vụ triển khai, gọi 1900 636 106 để có mức riêng.
Máy lắp vừa linh kiện này
tham khảo theo thông số trên tên hàngMô tả sản phẩm
G.SKILL RipjawsX Series DDR3 Memory Kit
Universal Compatibility and Superior Quality
Whether you’re a gaming enthusiast or a high-end system builder, you can count on the performance and reliability of the G.SKILL RipjawsX Series DDR3 memory kit.
The G.SKILL RipjawsX Series DDR3 memory kit is specially designed to complement dual-channel capable systems. It is tested under G.SKILL’s rigorous testing process to ensure the best performance, compatibility, and stability on both AMD and Intel systems. It delivers optimum speed and low latency, thus helping efficiently address the demanding needs in work and entertainment. And, it supports XMP 2.0 profiles for trouble-free automatic overclocking. The stylish heat spreader not only provides superior cooling efficiency, but also lets you show off your rig in style.
Award
Permission denied
Chosen By Overclockers
Enthusiasts’ choice can’t be wrong. Building on the world-class performance and overclockability, G.SKILL RipjawsX series DDR3 memory has been voted as the Best Memory Series by the community of the overclockers in 2011! If you need a high performance and high quality kit to complete your enthusiast PC, look no further.
Optimal Compatibility and Superior Quality
Unparalleled DDR3 memory solution, the RipjawsX Series is the memory of choice. Specifically designed to complement dual-channel capable systems and optimized for the widest compatibility with Intel and AMD platforms, each RipjawsX memory kit is put through numerous compatibility and stress tests. As a result of the strict quality control, RipjawsX offers the highest quality, fastest speed, lowest timing, and firmest stability.
Stylish Heat Spreader Design Keeps It Cool
Sporting a sleek and stylish heat spreader, heat dissipation is maximized by increasing surface area for cool air to pass over while your system is gaming or computing. The hollow teeth-like heat spreader fins is made from aluminum and designed to allow maximum air flow for maximum cooling efficiency.
Intel XMP Support
All G.SKILL DDR3 memory come with the latest Intel XMP standard developed for Intel platform. It provides PC enthusiasts an entirely trouble free overclocking experience to boost their Intel systems for extreme levels of performance, while retaining system stability.
Learn more about the G.SKILL F3-14900CL9D-8GBXL
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-14900CL9D-8GBXL |
| Capacity | 8GB (2 x 4GB) |
|---|---|
| Speed Speed | DDR3 1866 (PC3 14900) |
| CAS Latency CAS Latency | 9 |
| Timing Timing | 9-10-9-28 |
| Voltage Voltage | 1.50V |
| ECC ECC | No |
| Buffered/Registered Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155 and AMD Llano / AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors |
| Date First Available | October 13, 2022 |
|---|
Easy to use nice ram.3/23/2014 5:52:04 AM
Pros: Nice G.skill ram as always, easy to setup just go into bios set xmp profile 1 or 2, reboot saving changes and its running at speed.
Cons: none worked great.
Overall Review: This ram runs at 1600 until you set your xmp profile in bios, or you can set it manually, if you want to run this in 1600 you can just set the timings to 9-9-9-24 yourself instead of using the loose timings it defaults too for 1600.
Fantastic!2/6/2013 6:57:22 AM
Pros: I swapped this set out with the former GSkill 1600 RAM for my AMD Trinity APU A10 5800K and the WEI graphics rating went from 6.4 to 6.9!
People are not kidding when they say the graphics cores are extremely fast but the lack of GDDR5 like on a dedicated graphics card. That really makes the system RAM speeds important. All FM2 socket boards accept 1866 natively without overclocking and all Trinity APUs have a memory controller that operates at 1866 as well so this is definitely the RAM to get!
It also upped the RAM WEI rating from 7.3 to 7.4. I was disappointed since I’ve seen 1600 MHz low timing RAM get a 7.8 on an i5 Ivy Bridge system.
Cons: I don’t see any reason to get this RAM for anything other than a modern AMD system. Putting this in an i5 for example will still operate it at 1600, although if you’re overclocking the base frequency, this would probably stand up to speeds slightly higher than 1600 in theory but I haven’t tested that.
Overall Review: I haven’t tested overclocking this set past 1866 but generally, this series of RAM doesn’t go far past its stated rating because if it did test higher, it would have been released as a higher speed RAM kit.
bought in 2012 – still works in 201410/17/2014 8:51:30 AM
Pros: Just wanted to share that I bought one of these in 2012, and it still works with no problems today! (Oct 2014)
Cons: None
Cheap, reliable, and fast4/3/2013 9:51:17 AM
Pros: We have purchased several of these kits over the past year or two. All work flawlessly, unless serious overclocking is a concern.
Cons: Offer less overclocking margin than the fancier (and more expensive) versions.
Fast and reliable12/29/2011 3:51:04 PM
Pros: FAST and reliable even when system is oc’d.
aluminum heat sinks built in
Cons: none
Overall Review: Like the colored aluminum heat sinks. Pictures do not do them justice. Don’t usually open my system up and show it off, but it does look nice.
MOBO had to manually adjust the timings on my mother board.
fantastic sticks12/14/2011 7:56:46 AM
Pros: I currently am running them on THIS computer at 2200 at 11-11-11-28 1T, and I could probably do better, I’ve just been too lazy to tighten up the timings or even try to take it further, it probably COULD overclock further. Stock voltage as well, btw.
if you have an A8-3850, THIS is the ram you want.
Cons: none, fantastic ram.
Overall Review: upgraded from 8GB ripjaws 1333 to 8GB ripjaws 1866 and WHAT a difference. The 1333’s are garbage compared to these, I could only OC them to 1600 at 10-10-10 2T before they stopped working. They couldn’t go any higher, at any timing or voltage.
Horrible RAM12/29/2012 10:16:07 PM
Pros: Newegg Customer service
Cons: I got this RAM as a Christmas gift. I plugged it up, turned on the PC, went into bios and first thing was set up the RAM.
XMP
Profile 1 with auto frequency and listed timings=Fail
Profile 2 with auto frequency and listed timings=Fail
Profile 1 with set frequency or timings=Fail
Profile 2 with set frequency or timings=Fail
Auto Profile with set timings and frequency to standard=Fail
Auto Profile with everything auto=Boot.
The only way I could get it to boot was with the Auto settings, but this still wasn’t good. The auto is the only way it would run, and auto set the frequency to 1686 I think, with basic timings and higher voltage. Ram was meant to upgrade my system and instead lowered it. $20 ram I had before worked better. RMA’d for a refund. First time I have bought G.Skill RAM, probably the last.
Overall Review: Newegg Customer Service fixed everything. Was so glad my mother bought it here, otherwise I would be much worse off.
Manufacturer Response:
.
Dear Customer
Dear Customer
We are sorry to hear you were unable to get the memory working properly in your system. Not all CPUs natively support DDR3-1866, so additional tweaks may be necessary to stabilize the system. Please contact the G.Skill technical support team with hardware specifications and they will be glad to assist you. With the proper settings, the computer should be very fast at DDR3-1866 9-10-9-28 1.50V. The RAM is guaranteed at these values, so if you have a compatible motherboard and CPU, it should work without a glitch. For any further questions or concerns, feel free to let us know.
Thank you
GSKILL SUPPORT
Quality and customer service are our top priorities.
Tech Support Email: ustech@gskillusa.com
RMA Dept Email: rma@gskillusa.com
G.Skill Forum: http://www.gskill.us/forum/
When it comes to memory, when you say G.Skill, you’ve said it all7/31/2016 10:49:00 AM
Pros: What’s to be said, quality construction & great performance at the right price.
Cons: None.
Overall Review: ! A note for AMD FX processor owners. !
If you want to run at 1866 it’s best to use only 2 sticks.
I had 8 gig (2 x 4 gig) sticks of this RAM already installed in my PC, running at 1866 mhz, and I wanted to upgrade to 16 gig, so I ordered another 2 x 4 gig kit.
The memory works fine, but will only run at 1600 mhz.
Little did I know that in most cases AMD FX processors will only allow for 1600 mhz with 4 sticks installed.
According to AMD white paper, to run at 1866 mhz or faster you need a memory configuration that only uses 2 sticks of RAM.
Not a big deal and no fault on G.Skill or NewEgg
Điểm nổi bật
- DDR3 1866 (PC3 14900) Timing 9-10-9-28 CAS Latency 9 Voltage 1.50V
- Bộ nhớ DDR3
Sản phẩm tương tự
