EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan Power Splitter Adapter Cable w/ Self-sticker for 3Pin / 4Pin fan

Name: EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan Power Splitter Adapter Cable w/ Self-sticker for 3Pin / 4Pin fan
SKU: 9SIACJF7730777
Price: 409695 VND
Availability: InStock

SKU: 9SIACJF7730777Thương hiệu: KHAC

Còn hàng· Giao hàng sau 3 ngày

409.695 ₫

Giá chưa gồm VAT 8% · Đã gồm VAT: 442.471 ₫ / sản phẩm

Điện ước tính: 86 kWh/tháng · ~280.800 ₫/thángTính TCO chi tiết

Tạm tính: 409.695 ₫

Bảo hành 36 tháng

Chính hãng

Giao sau 3 ngày

Toàn quốc

Hỗ trợ kỹ thuật

24/7 qua hotline

Hoá đơn VAT

Đầy đủ, đúng hạn

Mua càng nhiều, giá càng tốt

Bảng đơn giá theo số lượng đặt mua
Số lượng	Đơn giá	Tiết kiệm
1–2 máy	409.695 ₫	—
3–9 máy	397.404 ₫	−3%
từ 10 máy	385.113 ₫	−6%

Giá trên chưa gồm VAT. Đơn từ 20 máy trở lên hoặc kèm dịch vụ triển khai, gọi 1900 636 106 để có mức riêng.

Máy lắp vừa linh kiện này

tham khảo theo thông số trên tên hàng

Mô tả sản phẩm

@import url(//c1.neweggimages.com/WebResource/Themes/WWW/CSS/seller/a_plus_content.css)
@import url(//c1.neweggimages.com/WebResource/Themes/WWW/CSS/seller/a_plus_content_responsive.css)

EN-Labs fan hub, a central distribution point in your computer! Especially in systems with many fans or have large radiators where multiple fans can be mounted, it is handy to have a central power point to connect the fans.

Features

It is designed for enthusiasts with need for controlling numerous system fans
Capable of expanding one motherboard PWM fan header to support up to ten fans.
Ten capacitances equipped for every fan output, protect your device safe.
Support PWM Function, Speed control, satisfy your control needs.
Compatible with 3-pin / 4-pin Fans (Due 3pins no PWM controller, 3pin fans would run in full speed. )
Comes with Self-Stick for easy installation and options to hide the PCB itself.
All fans power by SATA 12V from PSU, reduce motherboard power load and heat.
Since only one RPM signal can be read by one motherboard connector, only ‘ Red header Fan’ channel of the PWM hub carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to this port

Note:

Port of red header is for CPU Fan, request to connect PWM fan priority always. Hub runs in full speed and does not support PWM function if just connect others and miss this red header connecting

4 Pin PWM Fan Hub
10 Ports PWM 4pin output
Power by SATA 12V
2-pin / 3-pin fan can be plugged in to use, but can not achieve PWM control speed]

10 capacitor equipped fan hub
Provide more protection for your fans connected

SATA Powered
2 Pin PWM cable included for PWM control
The Red color 4 Pin header is special for CPU 4pin Cooler, request to connect PWM fan priority always

Comes with Self-Stick
Easy installation and options to hide the PCB itself in your PC case

Specification

Type	10 Ports PWM Fan Hub
Power Provide	SATA Power by PSU
Output	10 Ports 4Pin Fan Headers
PWM Function	Supports PWM Control by Motherboard
Cable Length	1.3 Feet
Application	Compatible with 2PIN /3 PIN / 4PIN fans

Learn more about the EN-Labs PWMHUB10S


Best Seller Ranking	#29 in Internal Power Cables

Model
Brand	EN-Lab
Model	PWMHUB10S
Type	Fan power cable
Type	PWM 4pin fan hub splitter
Color	Black

Details
Length	16inches / 40CM
Cable Length	2 ft.

Connectors
Connector A	SATA 15-pin
Connector B	10 x PWM TX4 4pin male
Connector Number	12

Features
Features	It is designed for enthusiasts with need for controlling numerous system fans Capable of expanding one motherboard PWM fan header to support up to ten fans. Ten capacitances equipped for every fan output, protect your device safe. Support PWM Function, Speed control, satisfy your control needs. Compatible with 3-pin / 4-pin Fans (Due 3pins no PWM controller, 3pin fans would run in full speed. ) Comes with Self-Stick for easy installation and options to hide the PCB itself. All fans power by SATA from PSU, reduce motherboard power load and heat. Since only one RPM signal can be read by one motherboard connector, only ‘ Red header Fan’ channel of the PWM hub carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to this por

Additional Information
Date First Available	November 06, 2018

Kevin R.

Ownership: 1 week to 1 month

Verified Owner

Super cheap, works great10/9/2019 9:17:55 PM

Pros: Cheap
Works
What more do you want?

Cons: None so far

Overall Review: So at first I was kinda bummed that my MB utility wasn’t seeing the fan RPM from the hub. I figured maybe it just didn’t do that, not a big deal, the PWM control was working properly so whatever. Then I read in the specs that it only reads the RPM on the #1 connector, and I had plugged my fans into the other side. Fixed that, and bam, it sees the RPM now. So yeah, don’t be an idiot like me and all should be good.

Andrew S.

Ownership: 1 month to 1 year

Verified Owner

It works!5/13/2019 9:48:57 AM

Pros: – can do 10 fans (4-pin and 3-pin)
– it’s cheap
– it works

Cons: – the only thing I wish were different is the power connection – sata power connector needs to connect directly on the board, but I wish it was rather a power cable out from this fan controller so I can make the actual sata power connection somewhere else in the case. where I needed to place the fan controller based on space, fans cables being able to reach the controller from the front / top / bottom / rear of the case, it was pretty difficult to run a sata power cable – I actually ended up having to run a separate sata power connection from the PSU, as I couldn’t get a multi-sata power cable to route to my SSD, pump, then to the fan controller..

Overall Review: – i replaced the stock fan controller that comes with Fractal Design R6 because, while that controller worked just fine, it only had 3 4-pin PWM connections available. but that stock controller had a extended power connector rather than the sata power connection being on the board..

Anonymous

Ownership: 1 week to 1 month

Verified Owner

Works as advertised11/15/2018 3:41:29 PM

Pros: Works as advertised, great deal for the price.

Cons: none that I can think of. Slapped it on the case plate for the mother board, plugged it in and it worked.

Anthony G.

Ownership: 1 day to 1 week

Verified Owner

Great controller3/23/2019 7:43:08 AM

Pros: bought this for my case as i had a lot of fans, hooked up nicely and just worked. The 3m tape on the back is a nice touch, fit nicely under the back-panel

Cons: None that i can see

FAHAD A.

Ownership: 1 week to 1 month

Verified Owner

It Works as it should be!3/12/2019 10:50:28 AM

Pros: Amazing good quality!

Cons: N/A

Anonymous

Ownership: 1 week to 1 month

Verified Owner

Item was a perfect fit/match3/8/2022 8:31:16 AM

Pros: The product was good and probably the best thing about it was it only uses one fan port to connect it. Make sure you have the SATA connector though not the MOLEX, fortunately mine came with the pc so double check that so you can order both at the same time if you have to.

Cons: None, the product works great for the price.

Overall Review: Definitely would recommend and purchase again if I had to

Corey B.

Ownership: more than 1 year

Verified Owner

Works great…12/17/2021 8:25:35 PM

Pros: My motherboard didn’t have anywhere near enough spots to plug in fans and this worked out perfect. Sits on the back side of the motherboard plate and back case panel and powers everything fine.

Cons: None. Works as expected.

Overall Review: It was cheap and does exactly what I needed it to do. Distribute power to all my fans.

TIMOTHY L.

Ownership: 1 month to 1 year

Verified Owner

Very handy item2/21/2021 7:14:17 AM

Pros: A pro is that there are connections for ten (more than enough) fans!

Cons: This came with a sticker for mounting, but I personally used a zip tie, as I feel it is more secure and would avoid the possibility of the sticker coming loose over time (although I have no evidence that this happens).

Overall Review: This works well for a homebuilt desktop with several fans.