Dell T7610 PTC Creo Workstation E5-2687w V2 8 Cores 3.4Ghz 16GB 250GB M.2 SSD K2000 Win 10

PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.

Processor: Single Intel Xeon E5-2687wv2 Eight Core 3.4Ghz Processor 8 Cores, 16 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR3-1866 Memory. Supports up to 256GB of total memory, Quad channel up to 1866MHz ECC RDIMM memory; 8 DIMM slots (4 per processor). (actual memory speed dependent on the processor capability)

PCIe Solid State Drive: 250GB M.2 SATA PCIe SSD with PCIe Adapter Card

Storage: Drive

Drive Bays: Up to three 3.5″ or four 2.5″ internal SATA, SAS or SSD drives. Additional add-in controller required for SAS hard drives.

Raid Controller: Intel AHCI 6Gb/s SATA controller with six ports (two
6Gb/s, two 3Gb/s, two reserved for optical drives)
supports software RAID 0, 1, 5, 10

Graphics: Nvidia Quadro K2000 2GB GDDR5 Graphic Card, DirectX 11 (Certified Hardware for PTC Creo)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: PTC Creo Software is not included

Power Supply: 825w

Optical: DVDRW Drive

Networking Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support.

Slots: Two PCIe x16 Gen 3; two additional PCIe x16 Gen 3 (requires second processor option); one PCIe x16 Gen 3 wired x4; one PCIe x16 Gen 2 wired x4; One PCI 32bit/33MHz.

Front Ports: 3 – USB 2.0, 1 – USB 3.0, 1 – Microphone, 1 – Headphone.

Rear Ports: 3 – USB 2.0, 3 – USB 3.0, 2 – PS2, 1 – Serial, 2 – RJ45.

Internal Ports: 3 – USB 2.0, 8 – SATA/SAS 6Gb/s, 2 – SATA 6Gb/s (for optical drives).

Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.