Dell Precision T3610 AutoCAD E5-1620 V2 4 Cores 3.7Ghz 128GB 500GB M.2 SSD K600 Win 10

AutoCAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. Nvidia Quadro are supported and certified by AutoDesk. This workstation is certified to work with AutoCAD

Processor: Single Intel Xeon E5-1620v2 Quad Core 3.7Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 128GB DDR3-1866 Memory. Supports up to 128GB of total memory, 8 DIMM slots Quad channel; Up to 128GB 1866MHz ECC or 1600MHz non-ECC DDR3 memory (actual memory speed dependent on processor capability)

PCIe Solid State Drive: 500GB M.2 SATA SSD with PCIe Adapter Card

Drive Bays: Up to three 3.5″ or four 2.5″ internal SATA, SAS or SSD drives. Additional add-in controller required for SAS hard drives. One external 5.25” bays. One external slimline optical bay.

Raid Controller: Integrated: Intel AHCI 6Gb/s SATA controller with six ports (two 6Gb/s, two 3Gb/s, two reserved for optical drives) supports software RAID 0, 1, 5, 10

Graphics: Nvidia Quadro K600 1GB DDR3 Graphic Card, DirectX 11 (Certified Hardware for AutoCAD 2019)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: AutoCAD Software is not included

Power Supply: 425W Power Supply

Optical: DVDRW Drive

Networking

Slots: Five full length, one half length: Two PCIe x16 Gen 3; one PCIe x16 Gen 3 wired x8 (half length); one PCIe x4 Gen 2; one PCIe x1 Gen 2; One PCI 32bit/33MHz.

Front Ports: 1 USB 3.0, 3 USB 2.0, 1 Headphone,1 Microphone.

Rear Ports: 3 USB 3.0, 3 USB 2.0, 2 PS2, RJ-45 (NIC)

Internal Ports: 3 USB 2.0, 2 SATA 6.0GB/s, 2 SATA 3.0GB/s, and 2 SATA 3.0GB/s for Optical.

Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.